Showing posts with label how to. Show all posts
Showing posts with label how to. Show all posts

Friday, March 23, 2012

DIY Friday: How To Make A Headband Worthy of Blair Waldorf

Hello there lovelies,

Every fictional Upper East Sider worth their salt knows that you are nothing without a headband. Blair Waldorf never goes far without one, she uses them to crown her personal army, and when she moves on from high school a bejewelled headband is used to crown the next "queen" of the school. So, it is only fitting that during Gossip Girl week we learn how to make a headband worthy of Blair Waldorf herself.
Equipment required for this project: A large piece of lace (I used part of a thrifted lace curtain), a headband (I got this one from Just Jeans in my first year out of high school), a tape measure, tailors chalk, scissors & a sewing machine/handsewing.
First we're going to measure from one end of the headband to the other, lengthwise. My measurement is 37cm. Remember your measurement!
Next we're going to measure the width of the headband - my measurement here is 4cm. Remember this measurement as well!
Now, we use your tailors chalk to draw a rectangle on your lace, using the measurements we have just taken. You will need to double your width measurement so that the lace will fit around the headband. Remember to leave a couple of centimetres for seam allowance! My measurements were 37cm & 4cm, so my rectangle measured 40cm length by 10cm width (width measurement doubled + seam allowance).
Then we jump on our sewing machines and make a tube out of our lace! Fold your lace rectangle in half, with the wrong sides outwards. Stitch one of the short ends closed, and then turn your fabric to stitch the long end closed. Leave the other short end unstitched for now!
Turn your lace tube right side out...
And then squeeze it over your headband!
Now you've got something like this! A cute lace headband - and the lace pattern conveniently hides the skull pattern on my original headband. Fold the unstitched short end in, and handsew (or machine, if you're brave) shut. Blair Waldorf fans will realise though that a simple cute lace headband isn't enough for Blair. We've got to add some more detail!
Next, cut another long strip out of your lace. If you're feeling energised, or your lace looks like it will fray then finish the edges of the strip on your sewing machine. If you're lazy like me, just tie your strip into a bow. The longer the lace strip, the bigger the bow! I actually cut out a super-long strip of lace, and then doubled it over so that my bow would look a bit fuller.
Now attach the bow to your headband. You can do this using craft glue (which I am currently all out of), using a safety pin, or like I was forced to do due to the lack of craft glue, with a bobby pin/hairpin. Of course, the upside of attaching the bow with a safety pin or hairpin is that you can remove it depending on what kind of look you want!
All that's left now is to put your new pretty on, go outside and practice your best Blair Waldorf smirk. I'm not very good at it. I don't really think that evil smirking is really in my nature. I think I'm much more of a weird wide-eyed semi-duck-face expression kind of person. But at least now I'm a weird wide-eyed semi-duck-faced person with a pretty headband!

You know you love me, xoxo.

Thursday, March 15, 2012

DIY Friday: How To Remix The Same Dress Five Times

Remixing, or wearing the same items of clothing in a variety of different ways, is a favourite sport of mine. It's way to combine my love of creative dressing, with my desire to stop buying so many clothing items & be thriftier. In my wardrobe I always notice that there are particular items that I come back to, over and over again. Remixing isn't hard - it just takes a little imagination & creativity to get you started. If you're having trouble getting the remixing ball going, here are a few ways to make it easier:


Acessorise Like A Maniac. An outfit, or an item of clothing can be completely changed if you wear it with different accessories. My favourite floral dress (pictured above) has probably been worn with every different accessory I own. I wear it belted at the waist, with scarves tied around it, with no belt, with leggings & tights, or bare legged, with Doc Martens, with sandals, with knee-high boots, with ankle boots, with long necklaces, short necklaces, no necklaces, with black, with brown, with red, with yellow, and over jeans as a tunic top. Get crazy with your accessories, and you can have a completely different look every time you wear an item of clothing.


Layers, Layers, Layers. Layers change the look of a piece of clothing in an instant. Try looking at your favourite t-shirt in the mirror with different types of vests, jackets, cardigans or knits over the top. Layer up shorts with funky tights or leggings. Dresses can even be layered! Whack a skirt over a short dress & you've got a whole new top. Put a top on over a maxi-dress, and everyone will wonder where you got your new maxi-skirt. Wear your jeans & pants with boots over the top, and underneath, or with varying lengths of tops for a different look. Just pile your shit on, and see how it turns out. I promise, you'll find a look you like!

Identify & Shop For Workhorses. Whether you're a thrifter, or a chain store queen, there are always items waiting to be found that will slot perfectly into your wardrobe. First you need to think about the things that you feel are missing from your wardrobe. Do you always think your outfits would be better with a blazer, but you don't have one? Do you constantly bemoan not having a pair of fire-engine red tights? These are the things that it is a good idea to spend your money on, because you are obviously going to remix them! When I put on some extra weight around my hips recently, I noticed that I was really mourning having a pair of jeans that fit me nicely. It took me a few months to find a really good pair, but I kept on looking. Now I only need to have two pairs of jeans in my wardrobe - a pair of skinnies, and a pair of boyfriend jeans - because they work so well with everything else that I own. Once upon a time I had trouble culling my jeans down to the paltry amount of 10, because each pair worked so well with particular things, and looked terrible with everything else.


Remixing doesn't have to be boring. Articles about remixing often tell you to invest in lots of basics, in neutral colours - black t-shirt, a white button-up, black dress pants etc. - so that everything you have matches. I don't think clothing items need to be neutral to be remixed. The most remixed items in my closet are a thrifted owl print blouse (pictured above), a polka-dot dress (pictured above), colourful pants, and a floral bow-back dress (pictured at top). Items with personality, and a bit of a "wow" factor are still totally remixable. Once again, you just need to get creative. Try these items in combination with lots of different things - things that you don't even think will look good together, because sometimes they work even more splendidly than what your mind immediately jumps too. Put together colours that "don't work", mix up those patterns & get totally wild up in there!

Forget "Occasions". If you have it set in your mind that a certain clothing item is only appropriate for a certain occasion then you won't wear it as often as you could! Here's a story to illustrate my point: Jane bought a beautiful dress to wear to a wedding. Everyone at the wedding loved the dress, and it made Jane feel fabulous. But Jane felt like she could only wear a dress that special to a wedding, so she kept it hidden in her wardrobe waiting in vain for more friends to get married. When someone else finally did get hitched, she went looking for her perfect dress & found that it had been eaten by radioactive mice living in the back of her wardrobe. The end. You don't want that to happen to you, do you?


How do you feel about remixing? Would you rather have new clothes for every day of the week, or do you like the challenge of crafting new outfits from the same pieces? If you do love to remix, tell me all about it!

Until next time, xo.

Thursday, March 8, 2012

DIY Friday: How To Make A Statement Necklace From T-Shirt Scraps

Hello there lovelies,

If you've reading my blog for a while you just might vaguely remember me trying my hand at making some necklaces out of t-shirt scraps. Well, since then I've given a bit of thought to refining the process, and decided to make a tutorial out of it. Prepare to learn how to make a cool statement necklace out of old t-shirt scraps!

Equipment required for this project: t-shirts that you don't mind cutting up (the longer you want your necklace to be the bigger t-shirt you're going to need), scissors, about 10 buttons of assorted shapes & sizes, coloured thread (the kind you made friendship bracelets out of in primary school), ribbon and an assortment of beads. Oh, and feet (or a bulldog clip).

Apparently I forgot to take a photo of this, but start by cutting the bottom of your t-shirt off. You don't have to use the whole bottom half, just a small piece off the bottom will give you enough fabric. Next, cut down one of the side seams of the shirt so that you have one long, flat piece of t-shirt.

Cut your long flat piece of t-shirt into three long strips. This stripy fabric was helpful for this, as I didn't have to mark how big I wanted the strips to be for them to be equal sizes.

Next, you need to choose what ribbon or colourful thread to put into your necklace. I chose a yellow ribbon, and orange piece of thread for this one. Tie all your strips together with a knot, leaving enough length after the knot to tie your necklace around your neck at the end.

Secure your strips down with something. Because I am weirdly flexible, with strange monkey feet, I just hold my strips between my toes. Apparently attaching them to the back of a chair with a bulldog clip works just as well, if you're lacking in the monkey feet department. We're going to plait these strips together, just like plaiting hair (I held the ribbon with one strip of t-shirt, and the thread with another so that there were still three strips to be plaited).

Keep going with the plaiting! This part takes a while, so maybe watch a DVD or something while you're doing it. I watched The Boyfriend play his new copy of Mass Effect 3, which is pretty much the same as watching a movie. When you're finished plaiting, tie all the strips in another knot, remembering to leave enough length at the end for tieing!

Now you've got something looking like this. Pretty cool & colorful, but still a little boring.

Get out your random assortment of buttons! Try and choose some of different sizes & patterns.

Take a small length of thread, put it through the button holes and tie your buttons tightly to the necklace with a strong knot. Make sure you tie the knots really tight so that your buttons don't move around! I tied a couple of knots, just to be sure they would hold.

Keep tying on buttons until your necklace looks like this! I used ten buttons, but you could use as many or as few as you like. Hurray! Pretty easy, huh? Here's how to DIY another type that I've been making lately:

Again, cut three long strips of t-shirt material. Choose three different coloured pieces of thread, and tie all the strips together in a knot, leaving enough room to tie the necklace at the end. One t-shirt strip and one coloured thread together will make one strip for plaiting, but that comes a bit later.

Grab out your assortment of beads, and start tying them onto the strips/threads at different places. Put a knot right before where you want a bead, and another one after to hold the beads in place.

Keep going until you have a crapton of beads knotted onto your strips & threads.

Now, use your cah-razy monkey feet (or bulldog clip) to hold the strips tight as you plait them all together. When you reach the other end, tie all the strips in another knot, again remembering to leave enough length to tie the necklace.

What you'll have will look a little like some variety of bead factory exploded onto your necklace, which is pretty awesome in my books.

All that's left now is to rock the bajeesus out of your easy & thrifty new necklaces, possibly in front of your tripod for photos while your neighbours stare at you & wonder whether you've finally gone insane.

For the record, no, I haven't gone insane. I've been there for a long time, and I enjoy it immensely. How are you guys enjoying these DIY Friday posts? While I'm always brainstorming new DIY's to whip up for you, is there anything in particular you would like to see?

Until next time, xo.

P.S. Here's a photo of my goofy smile.

Friday, March 2, 2012

DIY Friday: How To Turn a Dress Into a Heart-Back Blouse

Hello there lovelies,

We're on a DIY mission today - a mission for me to finally post this DIY that I photographed almost a month ago! You guys that follow me on Facebook might remember me throwing a slight tantrum on my weekend trip to Hervey Bay. I'm such a bad travelling blogger! I forget to bring half my gadgets with me, and then throw tantrums because my beautifully planned posts go to waste. Well not this one!

Equipment required for this project: A dress that is too small in the thighs (pictured above, although it kinda just looks like I'm pointing at my crotch for no reason), an old crochet tablecloth, sewing machine, tailors chalk, sewing pins, scissors, plain white paper, & a pencil.

First, I took note of what button my dress started getting tight at. This is where we're going to chop it off. Take out your tailors chalk, and some kind of flat surface (usually a ruler is recommended, but I like to use The Boyfriend's magazine spines). Now draw a line at the spot that you want to cut the fabric. Grab your scissors, and cut along the line.

This is what you'll be left with! Already, we have a perfectly nice blouse - all we need to do is hem the bottom edge of the blouse so that the fabric doesn't fray. At this point I decided that my blouse was still a little too boring, and decided to add a heart-shape cut out at the back.

I really just winged this bit. I took out some paper, and experimented with the positioning and size until it covered the area that I wanted my heart to go. Then I whipped out my pencil & free-hand drew what is possibly the best heart-shape I have ever drawn in my life. Alternatively, you could find a heart template on the web, print it out & trace it to get your heart shape. Whatever you decide, you'll need to cut the heart shape out next.

Now, we're going to pin the heart to the back of our blouse. Again, I played around with the positioning a bit until I got the heart in the right position. Try to pin it down fairly firmly, as next you're going to cut around outline of this heart to get the heart shape in the back of your blouse.

Alright, now lay out your tablecloth. To make sure you get a big enough piece of tablecloth to cover the heart-shaped hole in your blouse, cut around the rectangle of the piece of paper that you cut your heart template out of. You're left with a rectangle of crochet fabric that you can manipulate better to completely cover the hole that if you just cut out a heart shape.

You're on the final step! Pin your crochet rectangle into place over the heart shape in the back of your blouse. Make sure it covers the hole completely, and that this is enough overlap for the crochet piece to be sewn onto the blouse fabric. Now whack this baby into your sewing machine, and sew around the heart shape. Now, all that's left to do is pose like a wacko in your cute new blouse:





I styled mine with my favourite jumpsuit from Trade Secret ($29.95), a belt from Trade Secret ($5.95), sandals from Trade Secret ($14.95), and an owl necklace from my beautiful friend Sarah. I also annoyed The Boyfriend by making very un-serious faces into the camera while he was trying to seriously photograph me. Enjoy!

Until next time, xo.

P.S. Here's some more really cute heart-related DIY's for you to try: lace heart cardigan, heart elbow patches for a sweater, heart-knee jeans, a heart sweatshirt, another heart sweatshirt, and how to get heart-shaped bokeh from your camera.

Tuesday, February 8, 2011

How To: DIY a Droopy Bow-Front T-Shirt

Hello there lovelies,

As you can see, I'm pretty exhausted. I made this cute droopy bow-front top, and decided to write up some instructions so that you can do it too! As you can see, my little dog is also super-tired from helping so much. Of course, by "helping" I mean sleeping on my fabric, incessantly whining and trying to sit on my lap while I operated the sewing machine. It was a big day for him. Thanks for the help Bow! And now, onwards to the DIY.

Materials:
  • 1 T-shirt (I used a t-shirt that already fitted me well, but you could use a bigger t-shirt and resize it)
  • 1 large rectangle/square of fabric (The wider it is, the wider the band over the shoulders. The longer it is, the bigger and droopier the bow).
  • Tailors Chalk
  • Fabric Scissors
  • Pins
  • Sewing Machine (I mean, if you really wanted to you could hand-sew, but that would suck)
Take the big piece of fabric, and cut it in half. You now have two long strips of fabric. Sew one end of one strip, to one end of the other strip. Now you have one really long strip of fabric.

Now you're going to make your long strip into a long tube. Fold the strip in half, with right sides of the fabric together. Sew all the way along one short side, and the long side of the folded strip.

Sew 3/4 of the other short side of the strip shut, leaving enough room to turn the tube right-side out - this way all the messy stitching is kept inside the tube.

Turn the tube right-side out, and neatly sew the hole closed. Congratulations you have a huge tube! Now put the tube aside for a minute, and we'll work on the t-shirt.

Find a t-shirt with a good scoop neck, and use it to mark where to cut the new neckline for the t-shirt you're working on.

Cut the neckline of the t-shirt where you marked it - you should be left with something that looks like this. Now it's time to bring that tube back into the mix!


So, I stupidly forgot to take pictures of this, but pin your tube to the neckline of your t-shirt, lining up the centre of the strip with the centre of the back of the t-shirt (You want the two ends of the tube at the front of the tee, because they're what will become your bow). Then sew your tube to the neck of your t-shirt, making sure you don't sew over any pins. Now you're pretty much done!

All that is left to do is put your new droopy-bow neck t-shirt on, and tie the ends of the neckpiece into a bow!
And of course, pose like a loser while look absolutely fabulous! Congratulations, you made an awesome shirt!

In this picture you can see little Bow's contribution to this tutorial - heaps of little creamy dog hairs. I'm so glad I decided to make one of these tops. I've seen quite a few variations on this design come through at work, but I held off buying one because I thought it would be easy to make (and what do you know, I was right). Let me know if you decide to make one! I want to know if my instructions make sense, haha.

Until next time, xo.